2010 BMW (DOHC) R1200GS Engine Vibration

Home Forums General discussion Motorcycle Talk – General Topics 2010 BMW (DOHC) R1200GS Engine Vibration

This topic contains 1 reply, has 1 voice, and was last updated by  GERARD GATINEAU 5 years, 9 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #59445

    strmboui
    Participant

    I am writing in regards to a problem I am having with my 2010 BMW R1200GS. Have any of you experienced a high-mid frequency vibration isolated to the engine with a loss of power starting at 3700 up to 8000 RPM?

    The base line is an engine that has the throttle bodies sync, valves adjusted and reprogrammed engine control unit by the dealer. This bike was very smooth through this revolution range up to the 24 K service. Now both hands and feet become numb due to the engine vibration that was not there prior to 24K. This bike did have a recall performed for the camshaft sensor reductor replacement.

    The local dealers are stumped and their only answer is keep riding it and perhaps it will get better. I would appreciate any help/advice to get the bike to run as it use to prior to the 24K service.

    Right now I have two options, ride it like it is or sell it!

    Thanks

    #63823

    GERARD GATINEAU
    Participant

    That does sound like a problem to me! I would suspect the valves are not right especially since work was done in the cam area. Too much of a coincidence for me! Maybe try another dealer?

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.